Search

The characteristics of the device are similar to the GVCH-12A model. The difference is the generator capacity of 25 liters / hour, the purity of the produced hydrogen is lower (99.9995% vol). Technical specifications Purity of hydrogen in terms of dry gas шы about 99.9995% Concentration of water vapor at 20OC and 3 atm is no more than 7 ppm Total hydrogen capacity reduced to normal conditions is 25 l/h The range of the specified output pressure of hydrogen is from 3.0 to 6.1 ati Stability of the output pressure of hydrogen is not worse than ± 0.02 ati The time of setting the operating mode, with the output turned off is no more than 30 min Volume of distilled water to be poured is 1.0 l Distilled water consumption is no more than 0.04 l/h Water consumption is 1.6 g/l of hydrogen The average life of a replaceable deionization filter cartridge (at maximum performance and single-shift operation) is at least 0.5 years Average pump life (for single-shift operation) is at least 0.5 years Power consumption: in stationary mode is no more than 250 VA maximum (at startup) is no more than 280 VA Overall dimensions of the generator, (width x depth x height) is not more than 230x470x450 mm The mass of the generator is. not more than 18 kg Operating conditions: ambient temperature, °C, from +10 to +35 powered by single-phase AC voltage, V, 220 (+10 -15)% and frequency, Hz, 50 +1 The generator for electrical safety meets the requirements of Class 1, type H according to GOST 12.2.025-76

A remote-controlled atomizer of powder samples with automatic change of revolver-type samples with arc excitation of the spectrum. It consists of an automatic tripod "Carousel" for arc spectral analysis and a spectroanalytic generator "Ball Lightning"– 40A fully compatible with the expert software system "ATOM" and the MAES analyzer.

It is designed for recording absorption spectra of solid, liquid and gaseous substances in the near and middle IR region (including drugs, lacquers and paints, petroleum products, explosives, pharmacological preparations, polymer films and fibers) with their subsequent identification, as well as for qualitative and quantitative analysis of mixtures containing several components.

The vacuum diaphragm pump PL.HM01.01.10 has two working chambers, which are connected in series. They are made of fluoroplastic, and other products have a fluoroplastic coating, due to which the device has high chemical resistance. Fully compliant with IP20 protection class. Characteristics • Valve material (valves) standard: chloroprene copolymer NO-68-1 (TU 38 0051166-98) • Country Russia • Power: 180 W • Overall dimensions, L×W×H: 322x140x200 mm • Protection class acc. with DIN EN60529: IP20 • Noise level: 75 dB • Power: 220 V/50 Hz • Ultimate vacuum: 10* mbar abs. • Maximum permissible excess pressure: 0.5 bar. • Capacity: 38 l/min • Connection outer diameter, 9 mm. • Maximum current: 1.2 A • Device weight: 9 kg Equipment Vacuum pump, cable, instructions, passport, packaging (vacuum regulator and spare parts are not included in the kit and must be ordered separately).

Laboratory funnel B-75-110 Primelab has a conical shape with an elongated stem. Its diameter is 9 mm, which is enough to work with substances of any consistency. The diameter of the funnel itself is 75 mm with a length of the entire product of 110 mm. Designed for pouring or pouring substances into another container.

The flat-bottomed flask P-2-500-50 Primelab has a spherical shape with a flat bottom. Designed for evaporation, filtration, distillation, synthesis and other laboratory processes. Made of borosilicate glass 3.3, resistant to temperature changes. Suitable for working with chemically active and toxic substances of varying consistency. Sterilization in an autoclave and other methods at high temperatures is possible. The flask is designed for 500 ml with a height of 170 mm. The neck diameter is 50 mm with a ball diameter of 105 mm.

The conical flask KN-2-500-34 Primelab is made of borosilicate glass, resistant to temperature changes. Designed for chemical reactions in laboratory conditions, including storage, mixing, heating, cooling and more. Has the following characteristics: • Volume – 500 ml • Neck diameter – 34 mm • Base diameter – 105 mm • Height – 180 mm.

The PrimeLab jacketed U-shaped cell is designed to heat or cool a liquid to control cell temperature. Made of transparent borosilicate glass. Suitable for working with chemically active and corrosive substances, as it does not react with them. The cell has a universal shape, which was well thought out by Primelab specialists during production. At the same time, other services for glassblowing production of various glass equipment are available according to the parameters required by the customer.

Conical flask Kn-2-1000-50 Primelab is a universal and important tool in a laboratory of any size and direction. Used for filtration, sediment separation, storage, heating, cooling or mixing of reagents. The flask is designed to work with 1 liter or less of any substance. Its characteristics: • Neck diameter – 50 mm • Base diameter – 131 mm • Height – 220 mm.

Longe AO 29/32-29/32 PrimeLab, TS – straight length with a bend, which serves as a connecting element in laboratory installations. The height to the outlet is 75 mm with a total length of 125 mm and a diameter of 9 mm. For connection, a core grind (29/32) and a coupling grind (29/32) are provided. The length is made of technical glass that can withstand high temperatures. Chemically resistant, long service life, suitable for intensive use.

Express portable Raman analyzer "Inspectr" RaPort® provides the quality of laboratory molecular analysis and accurate identification of material with maximum mobility. A completely portable device, lightweight, equipped with a built-in battery and wireless data transmission, it easily obtains spectra of prohibited materials and their compounds.

Use RaPort with your Android or Windows tablet/smartphone and enjoy the ease of analysis with EnSpectr mobile software. Create your own database, work with spectra and manage measurement parameters in one convenient interface. Identify parts of a substance in concentrations up to 1% thanks to a unique recognition algorithm and measurement quality.

Laboratory funnel B-100-150 Primelab with a stem diameter of 13 mm is necessary for quickly pouring bulk substances and pouring liquid reagents into another container with a neck diameter of more than 13 mm. The height of the entire product is 150 mm. It is made of borosilicate glass 3.3, resistant to wear and minor mechanical damage.