Search

The electric drying cabinet vacuum-compression SNVS (autoclave) is designed for vacuum degassing of epoxy compounds, for pouring and impregnating electric elements at elevated temperatures in vacuum and under pressure, as well as for carrying out various technological processes that do not contradict the technical characteristics of the equipment

The vacuum injection unit is designed for vacuum impregnation with an epoxy compound followed by its curing (polymerization) in a gas environment at elevated pressure and temperature up to 110 ° C.

The working fluid of the pump is water. The use of the 3VVN1-6M(H) pump for pumping out water-gas mixtures is allowed only if the bulk of the water is separated and discharged at the pump entrance. Failure to comply with this requirement may lead to unacceptable overload of the engine and destruction of the pump's working organs. The 3VVN1-6M(H) water ring vacuum pump is not intended for use in fire and explosion hazardous industries. The 3VVN1-6M(H) vacuum water ring pump is manufactured in the climatic version of UHL 4 and O4 (i.e. for moderate and cold climate) according to GOST standard 15150-69, meets the requirements of technical specifications TU 3648-053-00218526-2013, designed and manufactured taking into account the requirements of GOST R 52615-2006.

The 2MO-5 oil separator is installed on the exhaust flange of the pump by means of a quick-release connection, and can also be connected through a pipeline, if there is no possibility of placement on the exhaust flange. If you purchase the 2MO-5 oil separator as an independent product, it is necessary (only for the 2NVR-5DM pump, which has threads in the housing) to remove the pump housing and the exhaust olive, install the fitting instead of the olive with a nut and seal, lay the mesh inside the fitting, install the oil separator with a quick-release clamp, ring and seal.

The AVDM-160 high-vacuum unit consists of a vacuum diffusion oil-vapor pump, a nitrogen trap, a vacuum gate, a frame or a plate. The principle of operation of the AVDM-160 unit is based on the pumping action of a vacuum diffusion steam oil pump. When the AVDM-160 unit is operating, liquid nitrogen is poured into the trap. Condensation of working fluid vapors occurs on the elements of the freezing device cooled with liquid nitrogen. The frame (plate) is designed for mounting the components of the unit. The ends of the wires are attached to the connector fixed on the plate of the AVDM-160 units.

The LI-630 integrated flanged trap is installed inside the diffusion pump instead of the standard oil reflector, without increasing the overall dimensions of the diffusion pump. The LI-630 trap performs the function of an oil reflector, is installed instead of a standard oil reflector in pumps, has an additional number of cooled screens for capturing oil return flow vapors (more than that of the MU trap), covers the entire area of the input high-vacuum flange.

Electric vacuum drying cabinet SNVS-3.3,5/3-I2P is designed for drying and heating various materials in air and in vacuum at temperatures up to 300 ° C.

The electric vacuum drying cabinet SNVS-150/0-I2 is designed for degassing and setting the selected program (20 programs / up to 20 steps) of the vacuum depth with automatic maintenance of the set value.

The LP-500 flow-through water trap is installed on the inlet flange of the diffusion pump and is designed to reduce the flow of working fluid vapors into the pumped volume by condensing them on the cooled elements of the freezing device.

The series is designed for heat treatment according to pre-created programs. The presence of remote control and a number of software options allows you to use the product for long-term heat treatment modes. Vacuum drying cabinets can be used for: - gentle drying of thermo- and oxygen-sensitive substances, such as food, medicinal, cosmetic products; - complete removal of residual moisture from heat-sensitive components with a complex shape, such as components of electronic equipment, jewelry, watches and other precision mechanics; - removal of air when filling the molds with a compound, followed by solidification at a given temperature; - removing air from the product and replacing it with another necessary gas medium; - tempering, annealing or aging of metals with the appropriate processing temperature in a vacuum or protective environment; - drying of products after washing in flammable solvents (special version); - testing of devices under low pressure conditions under various temperature conditions.