Search

Richter absorber PrimeLab (high-speed) is a laboratory device for high-speed purification and absorption of gases. Its design consists of two spherical extensions. Two tubes are soldered into the top one: gas is released along the long one for purification, and through the second it comes out in a purified form. A high-speed Richter absorber was produced by Primelab from borosilicate glass. This determines the vessel’s ability to withstand the influence of different temperatures, strength and long service life. Does not react with chemically active substances. Thanks to transparency, you can observe all processes inside the vessel.

The mixer operates in a speed range from 50 to 1500 rpm, the maximum heating temperature of the working surface is 500 °C. The heating plate includes a base made of stainless steel and a working surface made of fire-resistant glass (glass ceramics). At temperatures above +550 °C, automatic overheating protection is triggered and turns off the heating. The device is equipped with an LCD screen to display set and actual temperatures, rotation speeds and additional animated icons. There is a timer for the specified operating time of the mixer; its maximum value is 990 minutes. There is a function for automatic detection of armature rotation failure. When the device detects an armature failure, the rotation stops. Then rotation resumes, but the speed is reduced by 10%, followed by restoration of the rotation speed to the user-specified parameters. A stall occurs if the armature becomes disengaged with the stirrer magnet and stops rotating. Disruption can occur for various reasons: the rotation speed is too high, the viscosity of the medium has changed during the mixing process, etc. When the power of the device is turned off, the set values of temperature, speed, timer time and the mode of detection (determination) of failure of armature rotation are stored in non-volatile memory. The armature rotation speed and heating temperature are set using two rotating knobs. Characteristics Motor power 16 W Range of operating speeds of the motor shaft, 200-1500 rpm Discreteness of setting the specified speed of rotation of the motor shaft, 10 rpm Resolution of displayed motor shaft rotation speed, 10 rpm Connection – external temperature sensor PT1000 (sold separately) Power consumption, 20 W Dimensions, weight Overall dimensions LxWxH, 380x220x120mm Working surface size, LxW, 200x200mm Maximum anchor length, 80mm Device weight 4.4 kg Contents of delivery Stirrer without heating PL-R-basic Operating manual combined with passport Anchor for stirrer in fluoroplastic sheath 8*50 mm Power cable with Euro plug

Primelab filtration apparatus, 500 ml flask is a laboratory device designed to simplify the filtration procedure in liquid media. Suitable for cleaning collections, filtering liquids and obtaining precipitates during various reactions. The apparatus is equipped with a receiving conical flask with an adapter and side outlet, a filter, a clamp and a 300 ml cylindrical funnel. The volume of the filtrate receiver is 500 ml. All parts of the device are made of durable borosilicate glass, thanks to which it has a long service life.

Low glass PrimeLab, N-1-5000 is a popular laboratory container, which is designed to work with reagents with a volume of no more than 5000 ml. There is a measuring scale on the wall to quickly determine the volume of the contents. The glass is made of heat-resistant glass that can withstand temperature changes up to 200°C. Suitable for intensive use due to its mechanical resistance and durability.

Along AO-29/32-29/32 TS Primelab is a connecting element for connecting additional equipment to reaction vessels and more. There is a side outlet, at the end of which there is an olive. It provides a strong connection to the soft hose. It has small dimensions: the height to the outlet is 75 mm with a total length of 125 mm and a diameter of 9 mm. The dimensions of the core and coupling sections are 29/32. Made from heat-resistant borosilicate glass of the Simax brand in accordance with GOST 25336-82.

The PrimeLab 60mm Petri dish is made of clear tempered glass that can withstand heat sterilization. Designed for reusable use. The cup consists of two parts: a base (60 mm) and a lid (65 mm), which is larger in diameter than the base and slightly smaller in height. The second part is superimposed on the first to protect the contents from the external environment.

Колба коническая Кн-2-50-34 Праймлаб – незаменимый аксессуар любой биологической, химической и прочих лабораторий. Несмотря на компактные габариты, имеет удобную форму в виде устойчивого основания (51 мм) и узкого горла (34 мм). Рассчитана на работу с жидкостями, объем которых не превышает 50 мл. Общая высота колбы равна 85 мм. Выполнена из прочного боросиликатного стекла.

Refrigerator HSV-300-14/23-29/32 Primelab is a laboratory device used for condensation of vapors formed as a result of boiling of the mixture. Equipped with a core grind (29/32) and a coupling (14/23), from where water is supplied to the cylinder, around which steam circulates. From the outside, the cylinder is affected by the cold room temperature. This creates the conditions for combined cooling. There are a total of 16 turns in the spiral, and the body length is approximately 30 centimeters with a diameter of 40 mm. The refrigerator is made by Primelab from high-quality borosilicate glass, resistant to mechanical stress. It is wear-resistant and has a long service life. The refrigerator can be manufactured according to individual customer specifications.

Колба плоскодонная П-2-50-22 Праймлаб из термостойкого стекла является надежным инструментом для выполнения различных химических реакций. В их числе смешивание, хранение, нагревание и охлаждение различных жидких составов. Вмещает до 50 мл веществ при высоте всего изделия в 100 мм. Диаметр шара равен 51 мм, а диаметр горлышка - 22 мм.

The PrimeLab reflux condenser is a device designed for condensation or rapid cooling of various samples. Thanks to its compact dimensions, it is suitable even for laboratories with limited space. Externally, the refrigerator has the shape of a wide elongated tube, inside of which there is a spiral for additional cooling of the samples. It is equipped with a 45/40 joint and GL14 threaded tubes for connection to other equipment. It has a flat bottom, making it stable for placement on a straight surface. The refrigerator is made of durable borosilicate glass, resistant to intensive use and mechanical stress. Possesses thermal and chemical resistance. Available for order from Primelab in any quantity.

A double test tube with a grinding core 29/32 consists of two test tubes connected to each other. It is used for chemical reactions, including pair processes. Due to the fact that the test tube is made of borosilicate glass, it has high thermal stability, strength and chemical inertness. Suitable for intensive use. Serial and one-time production of double test tubes with grinding cores is available upon request from the Primelab company. Before being transferred to the customer, all goods undergo an internal quality check, which guarantees the absence of defects and high quality.

Conical flask Kn-2-1000-50 Primelab is a universal and important tool in a laboratory of any size and direction. Used for filtration, sediment separation, storage, heating, cooling or mixing of reagents. The flask is designed to work with 1 liter or less of any substance. Its characteristics: • Neck diameter – 50 mm • Base diameter – 131 mm • Height – 220 mm.